 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| UNISONIC TECHNOLOGIES CO., LTD DTC115E NPN EPITAXIAL SILICON TRANSISTOR NPN DIGITAL TRANSISTOR (BUILT-IN RESISTORS) FEATURES * Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors. * The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input They also have the advantage of almost completely eliminating parasitic effects. * Only the on / off conditions need to be set for operation, making device design easy. 3 2 1 SOT-23 3 2 1 SOT-523 *Pb-free plating product number: DTC115EL ORDERING INFORMATION Order Number Normal Lead Free Plating DTC115E-AE3-6-R DTC115EL-AE3-6-R DTC115E-AN3-6-R DTC115EL-AN3-6-R Package SOT-23 SOT-523 Pin Assignment 1 2 3 G I O G I O Packing Tape Reel Tape Reel DTC115EL-AE3-6-R (1)Packing Type (2)Pin Assignment (3)Package Type (4)Lead Plating (1) R: Tape Reel (2) refer to Pin Assignment (3) AE3: SOT-23, AN3: SOT-523 (4) L: Lead Free Plating, Blank: Pb/Sn MARKING INFORMATION CB5 www.unisonic.com.tw Copyright (c) 2005 Unisonic Technologies Co., Ltd 1 of 2 QW-R206-055,B DTC115E PARAMETER Supply Voltage Input Voltage NPN EPITAXIAL SILICON TRANSISTOR ABSOLUTE MAXIMUM RATING ( Ta=25 ) RATINGS UNIT 50 V -10 ~ +40 V 20 Output Current mA 100 SOT-23 200 mW Power Dissipation PD SOT-523 150 mW Junction Temperature TJ +150 Storage Temperature TSTG -40 ~ +150 Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VCC VIN IOUT IC(MAX) ELECTRICAL CHARACTERISTICS (Ta=25, unless otherwise specified) SYMBOL VI(OFF) Input Voltage VI(ON) Output Voltage VOUT(ON) Input Current IIN Output Current IO(OFF) DC Current Gain GI Input Resistance R1 Resistance Ratio R2/R1 Transition Frequency fT *Transition frequency of the device PARAMETER TEST CONDITIONS VCC=5V, IOUT=100A VOUT=0.3V, IOUT=1mA IOUT=5 mA, IIN=0.25mA VIN= 5V VCC=50V, VIN=0V VOUT= 5V, IOUT= 5mA MIN 3 TYP MAX UNIT 0.5 V 0.1 0.3 0.15 0.5 130 1.2 V mA A k MHz 82 70 0.8 VCE=10V, IE=-5mA, f=100MHz * 100 1 250 EQUIVALENT CIRCUIT IN R1 R2 GND IN GND OUT OUT UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R206-055,B |
Price & Availability of DTC115E-AN3-6-R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |